How do I connect a 220V LED strip?

What do you need to connect a LED strip (220V)?

To connect a LED Strip, you will need several components. Want to make sure you have everything you need? Order a bundle and you'll be fully equipped.

First, you will of course need a LED Strip. These are available in many variations. LED strips come in different light colors: 2800K-3000K (Warm White), 4500K (Natural White), and 6000K (Daylight White). There is also an RGB version. An RGB LED Strip features 7 different light colors, namely red, orange, purple, blue, green, yellow, and 6000K (Daylight White). A LED Strip is available in:

12 Volt
24 Volt
220-230 Volt (a 220-230 Volt LED Strip can be connected directly to the mains)

To connect a LED Strip, you need a LED Strip adapter.This adapter must have the same voltage as the LED Strip. Furthermore, the required power of the adapter depends on the length and wattage of the LED Strip.

When you have an LED Strip that does not need to be controlled, for example a 6000K (Daylight White) LED Strip, , you do not need any extra parts. Would you also like to be able to control your LED Strip remotely? You can do this using a remote control. . For example, you can control an RGB LED Strip remotely using the RGB IR remote control.

What you will need:

LED strip (usually on a roll)
Adapter (suitable for the voltage of the LED strip)
Dimmer/controller (optional, for dimming or controlling colors)
Connectors (optional, for connecting multiple LED strips)
Optional: soldering iron and solder (if loose connections need to be made)
Scissors or cutting pliers (to cut the LED strip to size)

Step 1: Choose a location

Choose a suitable place where you want to mount the LED strip, such as under cabinets, along baseboards, or on the ceiling.
Ensure access to a power outlet
Measure the length you need and, if necessary, cut the LED strip at the correct spot (this can be done on the indicated cutting lines).

Step 2: Cut the LED strip to size (if necessary)

Identify the cutting lines on the LED strip. These are markings where you can safely cut the strip without interrupting the circuit.
Use scissors or cutting pliers to cut on the cutting line.

You can read more information below:

Step 3: Connect the LED strip to the power source

LED strips typically operate on an adapter. Connect the plus (+) and minus (-) wires of the LED strip to the correct terminals on the adapter. These are usually the red (plus) and black (minus) wires.
If you are using a dimmer or controller ,connect the LED strip to the controller, and then connect the controller to the power supply.

You can read more information below:

Step 4: Test the connection

- Plug the adapter into the power outlet and check if the LED strip works. The strip should light up immediately if it is connected correctly.
- If acontroller is connected, test whether you can dim the LED strip or change its color (if it is an RGB strip).

You can find more information below

Step 5: Mount the LED strip

Most LED strips have aself-adhesive backing . Remove the protective layer and stick the strip in the desired location. Ensure the surface is clean and dry for proper adhesion.
If necessary, you can also usemounting clips for extra stability.

Step 6: Manage the cabling

Conceal the cables with cable ties or conduits for a neat and safe finish.

What to do when you cut an LED strip?

All our 220V LED strips can be cut per meter. This is also indicated by a scissor icon on the LED strip. Therefore, you cannot cut the LED strip per 30 or 50 cm. If you wish to use the remaining section again, you will need to purchase an additional 220V adapter. You can then place the end cap on the LED strip. These LED strips are also suitable for outdoor use, but this requires an additional step.In this situation, it is important that you seal or tape the end cap to prevent water from getting in. Once you have done this, you can place the LED strip in a damp location!

Wiring diagram for single-colour 220V LED Strips

Do you want to connect an LED Strip but are not sure how it works? No problem! With the explanation below, you can easily connect a220 Volt LED Strip .

Connecting an LED Strip is simpler than it seems. You can connect the LED Strip to the mains power using the adapter. A connector is included with the adapter. This is a copper coupling piece. The 2 pins of the coupling piece must be in contact with the LED strip and the corresponding adapter.

There are 2 wires inside the LED strip. One is the ‘+’ side and one is the ‘-‘ side.The adapter also contains 2 cables, one of which is blue and the other is brown. It is important that you connect the cables to the correct side of the adapter. The brown wire should be connected to the ‘+’ side of the LED Strip and the blue wire should be connected to the ‘-‘ side. You can distinguish the ‘+’ and ‘-‘ sides by looking at the LED Strip itself. When you look, you will see a small plus sign on one side of the LED Strip. This is where you should connect the brown wire. You can also find this in the connection diagram below. It is not a problem if you connect the ‘+’ and ‘-‘ incorrectly. You can turn the adapter around and reconnect it.

It is also important that the two metal pins make contact with the metal wires that run through the LED strip (you can see this better on the back of the LED strip). This must be done carefully, otherwise the LED strip will not work.

Would you like to connect the LED Strip including adimmer ? You can then use the connection diagram below.

Connection Diagram 220V RGB LED Strips

LedLoket has a wide range ofRGB LED Strips . 'LED strip RGB' might sound quite technical, but in fact, RGB strips are nothing more than LED strips with colours. RGB is colour coding for Red-Green-Blue, named after the 3 primary colours that form the basis of all other colours.

Connecting an RGB LED Strip follows the same principle as connecting a standard LED Strip. However, an RGB LED strip has 4 cables instead of 2. With this cable, you will also receive a connector to link the LED Strip and the adapter together.Because the LED Strip has 4 cables, the connector also has 4 pins.

Next, you can connect the adapter to the LED Strip. To do this, you need to look closely at the LED Strip. When you look at the very end, you will see 3 letters. From top to bottom, these are the letter B, the letter R, and the letter G.

When you look at the adapter, it has 4 wires in different colors. These are green, blue, red, and black. You must connect the adapter so that the black wire is at the bottom, aligning with the letter G. If you turn the adapter around and then connect it to the LED Strip, it will not light up. It is therefore important to connect the correct color to the correct letter. You can then plug the adapter into the socket and operate the LED Strip. You can also find this in the connection diagram below.

It is important that the four iron pins make contact with the iron wires that run through the LED strip (you can see this better on the back of the LED strip). This must be done carefully, otherwise the LED strip will not work. Do you want to dim your RGB LED Strip? You can often dim the LED Strip using theRGB Remote Control . With a remote control, you can change the color of the LED Strip, switch it on and off, and dim it. This allows you to always create the desired atmosphere!

Advice regarding LED Strips

If you have any questions after reading this article, please feel free to contact us. We are happy to help and advise you on which LED Strip is best for you to purchase.We offer a wide range of LED Strips in various wattages, light colors, and voltages.

View all LED Strips