Bathroom lighting: what should you look for?

Purchasing LED bathroom lighting

It can be difficult to choose the right lighting for the bathroom. Should you have a lot of light, or less in certain areas? Should the light be atmospheric and warm, or not? And where can I place which type of lighting? All these questions are answered in the article below!

What should you look for when purchasing bathroom lighting?

We are often asked which lighting is suitable for the bathroom. When it comes to bathroom lighting, it is important to pay attention to the following points:

1. Water resistance: Bathroom lighting must be water-resistant, as this lighting is used near water. Therefore, choose lamps that are specially designed for bathrooms and have a water resistance rating of at least IP44.
2. Safety: Bathroom lighting must be safe. Opt for low-voltage lamps or LED lighting to reduce the risk of electric shock.
3. Brightness: The right brightness is important for good lighting in your bathroom. Of course, in addition to a cozy atmosphere, you also want functional light. We therefore recommend choosing lamps with warm white light of approximately 3000K. Most bathroom lighting has a wattage of around 5 Watts. This provides you with sufficient light in the bathroom for tasks like cleaning or applying your makeup.
4. Placement: Consider where the lighting should be placed in the bathroom. For example, do you want LED lighting above the mirror or would you prefer it on the ceiling? There are various options to illuminate your bathroom.
5. Style: Choose lighting that matches the style of your bathroom.There are many different types of lighting available, from modern to classic.
6. Dimmability: Decide if you want to dim the bathroom lighting. This allows you to adjust the atmosphere to your preference and the moment.

Zones in the bathroom

In some areas of the bathroom, the lighting comes into more contact with moisture and water than in others. It is therefore important to choose LED lighting with the correct IP rating. The IP rating indicates the water resistance of the lighting. There are 3 different zones to distinguish in the bathroom:

Zone 1 – IP67: Lighting that you want to install in the bath or on the floor of the shower must have a minimum IP rating of IP67. This lighting can withstand water jets and is suitable for submersion in water.This type of LED lighting ensures that no short circuit occurs when the lighting comes into contact with water.

Zone 2 – IP65: This lighting zone is located directly above the bath or shower. This lighting can also come into contact with water jets, which is why it is best to have an IP rating of IP65. This ensures that the lighting is well protected.

Zone 3 – IP44: This zone is located approximately 60 centimetres outside the area of the shower or bath that can get wet. This also applies to the area around the sink. This lighting can come into contact with moisture or water vapour. For this reason, lighting with an IP rating of IP44 is required.

Other areas: In the other areas of the bathroom, any lighting will not come into direct contact with water. However, it is important to take potential water vapour into account.For this reason, we recommend installing lighting with a minimum IP rating of IP44 throughout the bathroom.

Assortment of LED bathroom lighting

Once you know where you want to install your lighting, you can select and order it. At LedLoket , we have a wide range of waterproof LED lighting that is perfectly suited for the bathroom:

• Waterproof recessed spotlights: Recessed spotlights are built into the ceiling and are often used in bathrooms. Recessed lighting is installed in the ceiling or wall, making the fixtures themselves not visible. This is a popular option for those who want a sleek and modern look. Furthermore, recessed spotlights are a convenient option if you want to illuminate specific zones in the bathroom.This type of LED lighting provides a focused beam of light, allowing you to illuminate the bathroom where it is needed.
• Mirror lights: Mirror lights are often installed above the mirror and are used to illuminate the face during shaving or applying makeup. These lights serve a functional purpose and feature a slim design.
• Waterproof ceiling lights: Ceiling lights are often installed in the bathroom for general lighting. This type of lighting is available in both modern and traditional designs.
• Wall lights: Wall lights can be placed on a wall and are ideal for illuminating specific zones in the bathroom. Furthermore, wall lights are very atmospheric and are available in various designs. In the bathroom, wall lights that are also suitable for outdoor use are often installed, as these wall lights are waterproof.
• Waterproof LED Strips: LED strips are flexible light cords with LED lighting. This type of lighting can be placed in various parts of the bathroom. Consider, for example, under a bathroom cabinet or in the shower.

Waterproof recessed spotlights	Mirror lights	Waterproof ceiling lights	Wall lights	Waterproof LED strips