LED Batten 60cm (Single) | 5 Years Warranty
-
...
-
Free shipping from 75,-
-
Ordered before 16:00 = delivered tomorrow
-
Shipped from our own warehouse
LED Batten 60cm (Single) | 5 Years Warranty
- Directly to:
- Description
- Specifications
- Reviews
- Related products
Specifications
-
Product group
-
Length (cm)
-
Width (cm)
-
Height (cm)
-
Voltage
-
Light colorDepending on light source
-
Operating hours
-
Number of light sources
-
FittingG13
-
IP ratingIP22 - Drip proof
-
ControlRemote control
-
Housing colorWhite
-
Housing materialAluminum
-
Number of cores
-
Beam angleAfhankelijk van lichtbron
-
Warranty
-
CertificationsCE, RoHs
-
ConnectionMains power
-
PowerAfhankelijk van lichtbron
-
MountingConstruction
LED Tube Fixture 60cm (Single) | 5-Year Warranty
- IP22 (Drip-proof)
- Suitable for indoor use
- Aluminum housing
- Dimensions in mm: 600 x 50 x 40 (LxWxH)
- Suitable for 1 LED tube of 60cm
- Includes all mounting materials
- 5-year warranty
- LED tubes NOT included.
LED tube fixture information:
This single LED tube fixture is suitable for 1x 60cm LED tube and has a length of 60cm. This single 120cm tube fixture features an IP rating of IP22 (drip-proof) and is therefore only suitable for moisture-free areas. This tube fixture can be linked to multiple tube fixtures; you can route the cable through the fixture to the next one. You can place all 60cm LED tubesin this fixture. This fluorescent fixture is made of lightweight and sturdy aluminum, and the housing is finished in a matte white color. Due to its high quality, you benefit from a 5-YEAR warranty!!
Installation is very easy.. You can mount the fluorescent fixture directly to the ceiling or wall using screws; the screw holes are already pre-drilled. This LED fluorescent fixture is directly powered on one side with mains voltage (220-240V). There is no longer a starter or ballast (VSA) inside this fixture. The LED fluorescent tubes are also powered directly on one side with 220-240V. This is much more energy-efficient because a ballast also continuously consumes power and can break down.
LED fluorescent fixture connection:
- Ensure that 220-240V power cables are available at the location where you want to install the LED fixture.
- Screw the fluorescent fixture to the ceiling, wall, or another surface.
- Connect the power cable to one end of the fixture (Therefore, no cable needs to be installed on the other end. This socket/fitting serves as a "dummy" to hold the LED tube in place.)
- Slide the fittings/sockets into the designated holes/cutouts.
- Place the cover over the sockets and around the fixture, and press it securely into place. Then, twist the plastic clips into the holes that are still visible on the underside.
- Insert the LED fluorescent tubes into the fixture, placing the end with the specification sticker of the LED tube into the socket/fitting of the fluorescent fixture where you connected the 220-240V.
- Turn the power back on and enjoy the light output of LED lighting.
For more information about installing and operating LED fluorescent fixtures and LED tubes, please refer to our article. “How do I connect LED fluorescent lighting?”
Looking for multiple types/lengths of fluorescent fixtures? Under our category 'LED fluorescent fixtures' you will find all our fluorescent fixtures.
