LED Tube Light 18W 120cm | Replaces 36W | Basic Series
-
...
-
Free shipping from 75,-
-
Ordered before 16:00 = delivered tomorrow
-
Shipped from our own warehouse
LED Tube Light 18W 120cm | Replaces 36W | Basic Series
- Directly to:
- Description
- Specifications
- Reviews
- Related products
Specifications
-
Product group
-
Length (cm)
-
Width (cm)
-
Height (cm)
-
Voltage
-
Light color4000K - Natural white (840)
-
CRI value
-
Operating hours
-
FittingG13
-
IP ratingIP20 - No protection
-
Housing materialPlastic
-
Beam angle270°
-
Warranty
-
Power18
-
Lumen2520
LED Tube Light 18W 120cm | High Quality
- Power: 18 Watt
- Replaces: 36 Watt (traditional tube)
- Lumen: 2160 Lm (light output)
- Lifespan: 25,000h
- Length: 120cm
- Material: Thermoplastic (hard plastic)
- Warranty: 2 years
High-quality tube light, direct one-to-one replacement in "old" fluorescent fixtures using the included LED starter.
Description:
This 18W LED T8 tube features a high light output of no less than 120 lumens per watt. This means a high light output relative to the amount of power this LED tube consumes. When traditional 120cm 36-watt T8 tubes are replaced by 120cm 18-watt LED T8 tubes, you immediately save 50% on your energy bill.Due to the high efficiency of this type of LED fluorescent lighting, you also benefit from greater luminous intensity! In addition, extra energy can be saved by converting your "old" fixture or by purchasing a new LED fluorescent fixture.
The 120 cm LED fluorescent tubes are available in the light colors 2800K (Warm white), 4000K (Natural white), and 6000K (Daylight white).
When purchasing LED fluorescent lamps, you must take into account which fluorescent fixtures you will be placing the LED T8 lighting into. Installing LED fluorescent tubes in new LED fluorescent fixtures is very straightforward. When installing LED tubes in "old" fixtures, our advice is to convert the fixtures. Your current/old fixtures contain a ballast (VSA) and a conventional starter. These also consume power (10 to 12W) and are redundant when new LED tubes are installed.
It is also possible to install new LED tube lights in old/traditional fluorescent fixtures without rewiring them. This is possible when you install the included LED starter . However, this does have disadvantages. For businesses, this method of replacing fluorescent tubes is strongly discouraged from an insurance perspective. For more information on this, please check our knowledge base. CLICK HERE
Want to know more about the different LED fluorescent tubes? Watch the video below!
