ION LED Dimmer | 1-10V | 1380W
-
...
-
Free shipping from 75,-
-
Ordered before 16:00 = delivered tomorrow
-
Shipped from our own warehouse
ION LED Dimmer | 1-10V | 1380W
- Directly to:
- Description
- Specifications
- Reviews
- Related products
Specifications
-
Product group
-
Length (cm)
-
Width (cm)
-
Height (cm)
-
Voltage
-
IP ratingIP20 - No protection
-
ControlOperation on product
-
Dimming technologyPhase cutoff
-
Housing colorBlue
-
Housing materialAluminum
-
Warranty
-
CertificationsCE, RoHs
-
ConnectionMains power
-
MountingBuilt-in
-
Maximum Wattage
Universal ION LED dimmer | 1-10 Volts
The LED Controller is highly suitable for dimming high-wattage LED drivers. Additionally, the universal controller is reliable thanks to its safety features and offers simple installation. Furthermore, you can stylishly finish the LED Controller with cover plates from all leading brands. This LED dimmer is also highly suitable for dimming low-voltage lamps (1-10V).
With this dimmer, you can dim 6 Amperes of power, which is 1380 Watts. The dimmer has been tested for drivers from brands including Meanwell, AGT, and Tridonic. The dimmer is suitable for switchgear from the brands: Gira, Busch-Jager, Jung, PEHA, and Berker. The dimmer has an IP rating of IP20 and can only be installed in dry rooms. The dimmer itself consumes 0.3 Watts.
What makes this dimmer so unique is, among other things, the silent dimming and the stable dimming at both high and low wattage.
Product features
- Overload protection: Yes
- Wattage: 0.3-200 Watts
- Fine adjustment: Yes, you can fine-tune this dimmer with the adjustment screw.
Overload protection
This 1-10V LED dimmer is overload protected, for example, if you connect too much wattage to a single dimmer. In the event of an overload, the LED dimmer interrupts the circuit and resets itself. This makes the dimmer extra safe.
Maximum wattage
The minimum wattage for this LED dimmer is 1380 watts. You should take this into account when connecting the LED lamps or LED drivers.
Refined adjustment
This dimmer dims easily from 0 to 100% and can be fine-tuned using the adjustment screw on the LED dimmer. You need the adjustment screw if an LED lamp flickers during dimming; you can use the screw to resolve this and set it to the correct position.
Installation of Ion LED dimmer
Install the dimmer according to the diagram (last image). Connect your switching wire to the terminal marked L0. Connect your control wires to the plus (+) and minus (–) terminals on the dimmer. Then, connect the same wires to the plus and minus terminals on the control side of the driver.
