Bundle | 4X AC Triac RF Wireless Dimmer | 100-240V | Incl. 1X Remote Control
-
...
-
Gratis verzending vanaf 75,-
-
Voor 16:00 besteld = morgen in huis
-
Verzonden uit eigen magazijn
Bundle | 4X AC Triac RF Wireless Dimmer | 100-240V | Incl. 1X Remot...
- Direct to:
- Description
- Specificaties
- Reviews
- Relevante producten
Specificaties
-
Product group
-
Voltage
-
IP waardeIP20 - No protection
-
BedieningRemote control
-
DimtechniekPhase cutoff
-
Kleur behuizingAnthracite
-
Materiaal behuizingPlastic
-
Aantal aders
-
Garantie
-
KeurmerkenCE, RoHs
-
AansluitingMains power
-
MontageBuilt-in
-
Maximale Wattage
Bundle Package | 4 x AC Triac RF Built-in Wireless Dimmer | 100-240V | Push to dim | Incl. 1x Remote Control
These four built-in TRIAC wireless dimmers are supplied with one wireless remote control. This allows you to control 4 different channels (e.g., rooms) with a single remote control. Wirelessly dimming and switching LED lighting on and off has never been easier. This new way of dimming allows you to control your LED lighting from the comfort of your chair! You can connect the wireless LED dimmer directly to 100 - 240V, so you do not need an additional converter.
The maximum power that can be connected per LED dimmer is 244 Watts.
The wireless dimmer is very compact, allowing you to easily install it in a mounting plate of a pendant lamp, or for example, between the power supply for your garden lighting, so you can even dim your garden lighting wirelessly. The dimmer must be installed in a moisture-free location, as it is not water-resistant.
Dimensions:
- Dimmer length: 52 mm
- Dimmer width: 52 mm
- Dimmer thickness: 26 mm
How do you connect a wireless dimmer with a remote control?
You can connect the dimmer directly to the mains power (220 Volt). Connect the power wires to the dimmer's input. On the output, connect the power wires that lead to your lighting.
You only need A2 and A1 when using a push dimmer.You then connect this to A1; you will not need A2 for this setup. In this configuration, the neutral wire is already connected at the input.
How do you pair the remote control with the dimmer?
Step 1. On the back of the dimmer, you will see a black button. To pair the remote control with the dimmer, you must press this button.
Step 2. On your RF Wireless remote control, select a zone to which you want to pair the dimmer.
Step 3. Once you have selected a zone, briefly press the ‘ON’ button and then briefly press the ‘OFF’ button.
The dimmer is now paired with your remote control and is ready for use.
Briefly pressing the "OFF" button will turn the lights off. Briefly pressing the "ON" button will turn the lights on.
If you press and hold the "ON" button, the lights will become brighter.When you press and hold the "OFF" button, the lights will dim.
