PHILIPS LED Tube Fixture 120cm (single) | Incl. 15.5W LED Tube

Philips LED Tube Fixture 120cm (single) including 15.5W LED Tube

Philips Tube Fixture Information:

• IP22 (Drip-proof)
• Suitable for indoor use
• Metal housing
• Dimensions in cm: 124 x 17.5 x 25 (LxWxH)
• Suitable for one 120cm LED tube
• Includes all mounting materials
• 3-year warranty

Philips Tube Information:

• 15.5 Watt, replaces 36 Watt
• Length: 120cm
• Construction: Thermoplastic (hard plastic)
• Lifetime: 30,000 hours000 hours
• Lumen: 1800lm (light output)
• Light color: 3000K, 4000K, 6500K
• 3-year warranty

Information Philips LED Batten:

This single Philips LED batten has a length of 120cm with a consumption of only 18 watts. This batten comes standard with the corresponding 120cm LED tube included. It replaces all "old" 36-watt fluorescent tubes. Therefore, you do not need to purchase a separate LED tube. This single 120cm batten has an IP rating of IP22 (drip-proof) and is therefore only suitable for moisture-free areas. This batten can be linked with multiple battens; you can feed the cable through the fixture to the next one. In this batten, you can install all 120cm LED tubes. This fluorescent fixture is made of light and sturdy aluminum, and the housing is finished in a matte white color. Thanks to its high quality, it comes with a 3-YEAR warranty!!

Installation is very simple. You can mount the fluorescent fixture directly to the ceiling or wall with screws; the screw holes are already pre-drilled. This LED fluorescent fixture is powered directly on one side with mains power (220-240V); this fixture no longer contains a starter or ballast. The LED fluorescent tubes are also powered directly on one side with 220-240V. This is much more energy-efficient because a ballast also continuously consumes power and can fail.

Installing the Philips LED Fluorescent Fixture:

1. Ensure that 220-240V power cables are available at the location where you intend to install the LED fixture.
2. Screw the fluorescent fixture to the ceiling, wall, or another surface.
3. Connect the power cable to one end cap of the fixture (The other end cap does not require a cable connection. This end cap/fitting serves as a “dummy” to hold the LED tube in place.)
4. Slide the fittings/end caps into the designated holes/cutouts.
5. Place the cover over the end caps and around the fixture and press it firmly into place. Next, turn the plastic clips into the holes that are still visible on the underside.
6. Place the LED tubes into the fixture, with the end of the tube that has the specification sticker inserted into the end cap/fitting of the fixture where you connected the 220-240V power.
7. Switch the power back on and enjoy the light output of your LED lighting.

For more information on how to connect and operate LED fixtures and LED tubes, please refer to our article. “How do I install LED tubes?”

Looking for various types/lengths of tube fixtures? You can find all our tube fixtures in our 'Tube fixtures' category.